Braveslinks guide

The major inventions in the field of home appliances that are used in the kitchen are the ovens. These ovens work with the help of microwaves and are very much faster in the rate and speed of cooking purposes. There are many oven food recipes that are available in order to cook those foods in the oven.

Many people just buy the appliance and just have them at home without using them much. The reason for this is that the people do not know how to make proper usage of the appliance. Some do not know how to cook food in them. If so, what are all the foods that can be cooked using an oven?

There are various recipes that are available and the procedure is also available along with the recipe on how to cook the food and how to make use of the microwave oven. The oven cooks or boils the food with the help of micro waves that are generated inside the oven.

These micro waves are generated with the help of the specialized set up that is designed inside the micro wave oven. When electrical power is supplied to the equipment, the waves get generated and the food gets cooked up.

One may think that the microwaves are very much harmful to the health of the humans. This thought of a person is hundred percent true. The micro waves are quite harmful to the human body. They may even lead to the damage of the DNA genetic material of the human body.

Yes, this can happen when our body is exposed to the harmful microwaves. But this does not occur when foods are cooked using the microwaves. This is because the waves heats up the container in which the food is placed. They do not enter the food material and do not harm the human body. The ovens are to be handled with due care and sincerity.

Even a small amount of over load of supply or shortage of supply may lead to disastrous effects. They are really complicated appliances. Only boiling type foods can be cooked using the microwave ovens.

Or even baking can be done using them. The only disadvantage is that toasts cannot be made using these microwave ovens simply because they are too powerful and will just burn the toast completely. But when it comes to cooking some nice roasted ribs this is the tool to use.

One night we were discussing the top 10 most influencial books on dating, and this is the list we came up with.

Special note: This page was about Baan Talay ycnow.com samui-villas.

I decided to write this article after spending many, many hours unsuccessfully trying to make myself a new template (skin) for my ArticleMS website. Now after much trial, and plenty of errors, I have finally succeeded, and achieved what I had begun to feel was not possible before. I have now made my very own ArticleMS directory template.

I had previously used the "default" template, which is nice, but I felt that I wanted the site to look more customised and different from the rest, so I attempted the changes. I might add that this is not being written by a "techie", I do know a "little bit" about editing through using MS FrontPage HTML editor, but if I have not got this exactly right, you coders out there, then please forgive me. What I do know, is that it works fine and my site now looks great.

What do you need?

Html Editor:

Obviously the first thing you will need will be some type of html editor, like either MS FrontPage, Dreamweaver, or something similar.

CSS Template:

Why CSS template? Because that is really all you need initially, no no header, footer or anything else, just the css style file, as the rest will all be made for you on installation. I will explain more about this later.

There are many free css templates around, just enter the search term "free css templates" into Google, and you will see millions of websites where you can view them, and download for free. The only condition that they have normally is that you leave the link back to the designer in place, normally in the footer of the page.

Before downloading the new template, it is important to find a design that you like, and one that you think will also fit in with your site. I chose a three column layout, which did prove a "little difficult" to say the least, but there are many types of css templates that you can select from. I wanted to make a "similar" template to that of an existing AMS Skin AmsNonZero, which I like, but with a different column layout.

As an example the current "default" skin used in ArticleMS 2.0 is a "two column" design, so if you selected another two column template design, with different colours, then it would be reasonably straight forward to implement your new template into your ArticleMS site.

After downloading your choice make sure that you have a file that says If it does not say that, but something then copy thefile, and then name it(this is important).

Install File:

In your existing website template files (default, AmsNonZero etc.,) you will have a file that says This file does it all for you, but you do need to edit it first!

So now you have your new template downloaded, let say it is in a folder that you have called "mysite", copy thefile from either your default or AmsNonZero template folder to your "mysite" folder. I used the copy from AmsNonZero, and also copied over the "fancybox" folder, but not sure if I needed this or not. So might be an idea for you to do so as well.

So now you should have at least the following files in your folder "mysite".

images folder fancybox folder

Editing, before installing:

Ok, now we are ready to edit thefile. I know very little about php files, and as I said earlier the change of templates was achieved by me after a lot of trial and errors. However, MOST of the templates that you will need to edit later will be installed into AMS Admin by this one file.

1/. First check the version that you are using of the You must have a 2.0 Versionfile for Ams 2.0. So check to make sure that line 3 of thefile says this: $version = '2.0';

2/. With thefile open use the "find & replace" function in your editor it will save you a lot of time!

Find AmsNonZero Replace mysite

What this does, is goes through the install file removing the previous template name, and then inserting your new template name in it's place. Under Replace use the name of YOUR template. Under Find insert the name of the file that you have copied it from AmsNonZero etc.,)

3/. About half way through the php code of thefile you will find text that will say something like this: This is the frontpage of your new ArticleMS installation. You do NOT need to edit this now, you can edit later via Admin AFTER you have installed your new template.

4/. The following you WILL need to edit. This depends on thefile that you are using, but between line 800 and 900 you will find the following code:

$queries[] = "INSERT INTO {$this->pre}blocks (block_name, block_owner, block_set, block_parent_name, block_display_name, block_url, block_description, block_active, block_type, block_html, block_php, block_cache_settings, block_settings) VALUES ('main', 'default', 'universal', '', 'Main', '', 'Global Template', 1, 2, '

Right under this code will be a selection of php code that you WILL need to edit in order to MATCH yourfile. The following code has been taken from the AmsNonZero and will change with different templates used. You will need to edit the code marked.

{$this->site_name} By-Line goes here

{$Blocks->mainmenu}

{$this->output}

{$Blocks->Ad_Google_Sky_Text} {$Blocks->topauthors}

{$Blocks->Ad_Google_Sky_Image} {$Blocks->Ad_Google_160_Link}

', '', '', '')";

I changed the code to match MYfile as follows:

{$this->site_name} Article Directory

{$Blocks->mainmenu}

{$this->output}

{$Blocks->Ad_Google_Sky_Text} {$Blocks->topauthors}

{$Blocks->Ad_Google_Sky_Image} {$Blocks->Ad_Google_160_Link}

', '', '', '')";

Make sure that you do NOT change anything other than the text highlighted. Save thewith all of the changes that you have made, and that is it finished.

Installation:

Ok now you are ready to install your new template.

1/. Upload your new skin/template in the folder marked "mysite" to the "skins" folder on your site. CHMOD the new "mysite" folder, and all files in it to "777" (So you can edit it.)

2/. Go to your Admin Panel select "Manage Skins". Where you should see your new template listed. Click "install", and all being well, it should install it for you onto your site.

Final Editing:

With your new AMS template installed all you now need to do is to edit it, and then view your changes. This is done in the same way as you edited your site previously, under "Edit Templates", but make sure that you select the newly installed skin to edit.

Then insert the blocks where you want them.

I hope that you find the above useful, I do know that if I had known all of this several months ago, it would have saved me an awful lot of work. I hope it helps you too.